Clear Cedar Adirondack Chair and Side Table set
Clear Cedar Adirondack Chair and Side Table set
-A set with a Chair and a Sidetable, combined into one shipping box.
-This premium tight-grain lumber is sourced from Old Growth Western Red Cedar, which is highly sought after worldwide and becoming increasingly rare. In lumber and furniture, you get what you pay for—lower-priced options simply can't match the quality, and there's a clear reason for the difference in cost.
-I use premium, quarter-sawn vertical grain, clear lumber to craft each chair, ensuring that every piece is not only unique but also of the highest quality, making it costly to produce.
-This kiln-dried lumber has been heat-treated in a specialized kiln to reduce its moisture content to a very low level, far lower than what’s typically found in big-box store lumber. This process ensures the wood is more stable and durable.
-"Clear" lumber means no knots, giving a blemish free look of perfection. Cedar is perfect for outdoor furniture because of it's light weight and resistance to decay.
-Starting with full 1-inch thick rough-cut wood, I end up with the thickest possible finished product after planing and sanding. Cheaper chairs often use thinner lumber to stretch their materials.
-The Chair features oversized 7-inch wide arms and dual cross braces for added sturdiness, with stainless steel fasteners used throughout.
-The packaging is completely plastic-free. I use satchels of fragrant cedar chips as filler, and everything in the box is either reusable or made from 100% recyclable cardboard and paper.
-All shaping is done by hand in small batches using powered tools, following a "quality over quantity" approach. I often sell out during the busy spring and summer months, but I’m always making more, so restocks are typically quick
Specifications
-Chair dimensions are 32 inches wide, 37 inches tall, 35 inches long and weighs 27 pounds
-Side Table dimensions are 14 inches wide, 19 inches tall and 23 inches long, and sits just under the chair arm
-The Chair/Table in the photos have been stained with Sico Proluxe Primary Coat RE 1. However all the wood I ship will be unstained, you will need to stain it if you wish, and I do recommend it for longevity.
Assembly
-Chair will arrive in 34 pieces, pre-drilled where applicable, countersunk where needed, edges rounded over and finish sanded with 120 grit sandpaper.
-Side Table will arrive in 14 pieces, pre-drilled where applicable, countersunk where needed, outer edges of top are rounded over, and all finish sanded with 120 grit sandpaper.
-Colour instruction sheets provided in the box.
-Seat slat measuring tool, stainless steel screws, carriage bolts, and screw driver bit included.
-Assembly takes between 1.5-2 hours for the Chair and 40 minutes for the Table, depending on your skill level and comfort with assembling. You will require a drill, a measuring tape, and an 11mm or 7/16" wrench.
There are a few Youtube videos I've made showing some assembly tips:
Our Milling Process
Here is a detailed overview of our lumber milling process, specifically focusing on the meticulous setting up and work required to mill vertical grain or 'quarter sawn' boards. Quarter sawing is a technique where the boards are cut from a log so that the growth rings of the tree are perpendicular to the face of the board, and makes a much stronger and more stable board that resists splitting after it’s dried. The best quality boards with the tightest growth rings comes from Old Growth trees. There are quality tiers in lumber and clear, quarter sawn is at the very top. That is what we use for our products and a reason why they are so expensive

We start off with a raw log, 8 feet long and this one is around 28 inches in diameter. Generally it isn't very efficient for us to start with anything less than this diameter, as the boards cut off each quarter won't be wide enough to utilize. A 28 inch log like this will be cut into quarters that are 14 inches at their widest, which should give us between 2-4 10 inch boards after trimming the live edge away and the core that is on the other side of the board. 26 to 36 inches in diameter is ideal for us














Shipping
-Shipping calculated at checkout, simply input your address to get a quote
-I use the postal system; Canada Post, USPS, EMS to ship so please make sure they can deliver to the address you use when purchasing, or you may have to pay again to reship if they are returned to me as undeliverable
-International orders will have to pay local VAT when your parcel arrives, not included in shipping, it is your responsibility to check on local laws regarding them
-A set with a Chair and a Sidetable, combined into one shipping box.
-This premium tight-grain lumber is sourced from Old Growth Western Red Cedar, which is highly sought after worldwide and becoming increasingly rare. In lumber and furniture, you get what you pay for—lower-priced options simply can't match the quality, and there's a clear reason for the difference in cost.
-I use premium, quarter-sawn vertical grain, clear lumber to craft each chair, ensuring that every piece is not only unique but also of the highest quality, making it costly to produce.
-This kiln-dried lumber has been heat-treated in a specialized kiln to reduce its moisture content to a very low level, far lower than what’s typically found in big-box store lumber. This process ensures the wood is more stable and durable.
-"Clear" lumber means no knots, giving a blemish free look of perfection. Cedar is perfect for outdoor furniture because of it's light weight and resistance to decay.
-Starting with full 1-inch thick rough-cut wood, I end up with the thickest possible finished product after planing and sanding. Cheaper chairs often use thinner lumber to stretch their materials.
-The Chair features oversized 7-inch wide arms and dual cross braces for added sturdiness, with stainless steel fasteners used throughout.
-The packaging is completely plastic-free. I use satchels of fragrant cedar chips as filler, and everything in the box is either reusable or made from 100% recyclable cardboard and paper.
-All shaping is done by hand in small batches using powered tools, following a "quality over quantity" approach. I often sell out during the busy spring and summer months, but I’m always making more, so restocks are typically quick
-Chair dimensions are 32 inches wide, 37 inches tall, 35 inches long and weighs 27 pounds
-Side Table dimensions are 14 inches wide, 19 inches tall and 23 inches long, and sits just under the chair arm
-The Chair/Table in the photos have been stained with Sico Proluxe Primary Coat RE 1. However all the wood I ship will be unstained, you will need to stain it if you wish, and I do recommend it for longevity.
-Chair will arrive in 34 pieces, pre-drilled where applicable, countersunk where needed, edges rounded over and finish sanded with 120 grit sandpaper.
-Side Table will arrive in 14 pieces, pre-drilled where applicable, countersunk where needed, outer edges of top are rounded over, and all finish sanded with 120 grit sandpaper.
-Colour instruction sheets provided in the box.
-Seat slat measuring tool, stainless steel screws, carriage bolts, and screw driver bit included.
-Assembly takes between 1.5-2 hours for the Chair and 40 minutes for the Table, depending on your skill level and comfort with assembling. You will require a drill, a measuring tape, and an 11mm or 7/16" wrench.
There are a few Youtube videos I've made showing some assembly tips:
Here is a detailed overview of our lumber milling process, specifically focusing on the meticulous setting up and work required to mill vertical grain or 'quarter sawn' boards. Quarter sawing is a technique where the boards are cut from a log so that the growth rings of the tree are perpendicular to the face of the board, and makes a much stronger and more stable board that resists splitting after it’s dried. The best quality boards with the tightest growth rings comes from Old Growth trees. There are quality tiers in lumber and clear, quarter sawn is at the very top. That is what we use for our products and a reason why they are so expensive

We start off with a raw log, 8 feet long and this one is around 28 inches in diameter. Generally it isn't very efficient for us to start with anything less than this diameter, as the boards cut off each quarter won't be wide enough to utilize. A 28 inch log like this will be cut into quarters that are 14 inches at their widest, which should give us between 2-4 10 inch boards after trimming the live edge away and the core that is on the other side of the board. 26 to 36 inches in diameter is ideal for us














-Shipping calculated at checkout, simply input your address to get a quote
-I use the postal system; Canada Post, USPS, EMS to ship so please make sure they can deliver to the address you use when purchasing, or you may have to pay again to reship if they are returned to me as undeliverable
-International orders will have to pay local VAT when your parcel arrives, not included in shipping, it is your responsibility to check on local laws regarding them
Abholung bei Creston verfügbar
Gewöhnlich fertig in 24 Stunden