'Factory 2nd' Cedar Adirondack Chair

-Throughout the year we put parts aside that have small issues and then put a few chairs together when we have enough parts stockpiled. Please email if you are interested and I can give you a rough timeline of availability, as we can go several months without having any.

-These Adirondack Chairs are the same size and dimensions as our regular Adirondack Chairs but are considered 'factory 2nds' as the parts have blemishes or small knots or chips from machining.  On the majority of the chairs you will not see the issues when they are assembled as they are hidden or on the backside of the piece but there are some where you will see a knot on the edge of the piece of wood or a seat slat where you can see a chip of wood removed or even a chunk missing on the edge of an arm rest but if you placed that side down you would never know its even there.

-Fully functional chairs but aren't 'perfect' as our regular model.

-This premium tight-grain lumber is sourced from Old Growth Western Red Cedar, which is highly sought after worldwide and becoming increasingly rare. In lumber and furniture, you get what you pay for—lower-priced options simply can't match the quality, and there's a clear reason for the difference in cost.

-I use premium, quarter-sawn vertical grain, lumber to craft each chair, ensuring that every piece is not only unique but also of the highest quality, making it costly to produce.

-This kiln-dried lumber has been heat-treated in a specialized kiln to reduce its moisture content to a very low level, far lower than what’s typically found in big-box store lumber. This process ensures the wood is more stable and durable.

-Starting with full 1-inch thick rough-cut wood, I end up with the thickest possible finished product after planing and sanding. Cheaper chairs often use thinner lumber to stretch their materials.

-The chair features oversized 7-inch wide arms and dual cross braces for added sturdiness, with stainless steel fasteners used throughout.

-The packaging is completely plastic-free. I use satchels of fragrant cedar chips as filler, and everything in the box is either reusable or made from 100% recyclable cardboard and paper.

-All shaping is done by hand in small batches using powered tools, following a "quality over quantity" approach. I often sell out during the busy spring and summer months, but I’m always making more, so restocks are typically quick.

Specifications

-Chair dimensions are 32 inches wide, 37 inches tall, 35 inches long and weighs 27 pounds

-Back slats meet the seat at 100 degree angle for a neutral seating position, comfortable for hours of relaxation

-The chairs in the photos have been stained with Sico Proluxe Primary Coat RE 1. However all the wood I ship will be unstained, you will need to stain it if you wish, and I do recommend it for longevity

Assembly

-Chair Kit will arrive in 34 pieces, pre-drilled where applicable, countersunk where needed, edges rounded over and finish sanded with 120 grit sandpaper

-Colour instruction sheet provided in the box

-Seat slat measuring tool, stainless steel screws, carriage bolts, and screw driver bit included

-Assembly takes between 1.5-2 hours depending on your skill level and comfort with assembling.  You will require a drill, a measuring tape, and an 11mm or 7/16" wrench

Shipping

-Shipping calculated at checkout, simply input your address to get a quote

-I use the postal system; Canada Post, USPS, EMS to ship so please make sure they can deliver to the address you use when purchasing, or you may have to pay again to reship if they are returned to me as undeliverable

-International orders will have to pay local VAT when your parcel arrives, not included in shipping, it is your responsibility to check on local laws regarding them